- ETHERNET STATUS ONLY 100MBPS MB BIOS HOW TO
- ETHERNET STATUS ONLY 100MBPS MB BIOS DRIVER
- ETHERNET STATUS ONLY 100MBPS MB BIOS DOWNLOAD
ETHERNET STATUS ONLY 100MBPS MB BIOS DRIVER
I know that debian does support that adapter by default so it is not a missing driver (and kali is built from debian)Ethernet has a zillion buzzwords, plenty of strange abbreviations, acronyms and “ short hand”. When this happened to me, I had a lose cable in the jack and the kernel was identifying that the connection could be 1Gbps, but was getting negotiated down to 100 Mbps (since one of the cables was having problems and 100 does not use all but 1000 does) This will pipe the output from the dmesg command (ie the kernel messages) to the grep command which will search for your network adapter name and only output those lines with that text. Yes utp cat5e this cables have no shield at all.īut ok i wil test wit another cable and give notice Is the easiest way to exclude that it is the cable itself.īy the way, the cable has no continuous shielding to the connector if I see it correctly. I would take as I said another short cat5e / cat6 / cat6A cable and use it to connect a 1Gbit router to the NAS They cost over 10.000€ and are used by the cable manufacturers for certification To test the bandwidth of network cables there are special testers that are used for certification like Fluke DSX-8000 This is a continuity tester that tests the pin assignment nothing more
ETHERNET STATUS ONLY 100MBPS MB BIOS HOW TO
I just learned how to change the server from cubic to westwood and thats cat Modem/Router: ZTE-ZXHN F670L ►►►►►► Internet 1 This is important for peer to test that the communication is done with the same congestion controlįor the other forwarded traffic this is not so important - only for the communication between the two devices So I guess that the router is set to westwood and the NAS is set to cubic I said that the NAS and the routers use different TCP congestion controls.ġ92.168.2.5 is your NAS according to the diagram so I assume you are running a peer to peer test between one of your routers and a client (your NAS) MAINROUTER (the server its conected to it) I had also thought about that, but since the usbs that this motherboard has are 2.0, I think I should buy a PCIe usb 3.0 and then connect the usb network adapter, and for that I think I would prefer to buy only a pcie gib lan
ETHERNET STATUS ONLY 100MBPS MB BIOS DOWNLOAD
► Tutorials & Wikis ► Download Firmwares ► Best Wifi Settings ► Complete Guide Wifi Vanilla, 2.4Ghz, 5Ghz, WPA2, Sharing USB Printer, Wired OpenMediaVault Data Server. Load Balancer, Failover, Vlans, QoS, DHCP. It is slightly shorter, but still too long to put it here without asking firstįiber Modem/Router: ZTE-ZXHN F670L ►►►►►► Internet 1ĢG,3G,4G Modem: Amplimax FIT Elsys EPRL18 ►► Internet 2 (failover) kauditd_printk_skb: 9 callbacks I don't think it gives any necessary information and then I dmesg -level=alert,crit,err,warn,notice,info coretemp coretemp.0: Using relative temperature scale! sd 8:0:0:0: Assuming drive cache: write through
ata7.00: NCQ Send/Recv Log not supported
If you want to keep using the local clock, then add: Unstable clock detected, switching default tracing clock to "global" pmd_set_huge: Cannot satisfy with a huge-page mapping due to MTRR override. Then I wrote the shortest dmesg -level=alert,crit,err,warn I don't want to "cross the line" and put so extence output without asking for permission before. Ok i write dmesg and Wow thats a very very long output, And although I would like to place it here because I know almost nothing about linux and maibe that data could show better the problem that i have. I would check dmesg, so ensure that there is not any messages saying this, then check your interface settings to ensure that you did not artificially limit it Yes, I know almost nothing about linux and it also seems very strange to me, and that is exactly how live-kali-linux-2021.2 comes out, and live linux-lite-5.4-64b I find it suspicious that the 3rd picture says the link is 100 Mbps. It takes a "community" to raise a router.ĭD-WRT non-official LIVE element/matrix chat Or try another gigabit nic using anything else besides intel.įor people who are new to the dd-wrt forums > I would try with a USB network adapter to see if it goes up to 1gbps.
0 kommentar(er)
